210-698-6076
MON-FRI: 9-5 | SAT: 9-4 | CLOSED SUN
 

Machine Care & Service

The Machine Manufacturers recommend getting your machine serviced at least once per year. Bringing your machine in for regular maintenance assures it will stay in top running condition.  No appointment necessary!

Our Factory Certified Technicians will service all BERNINA and Baby Lock models
including Sewing Machines, Sergers, Combo Machines, Multi-Needle, and Long Arms.

Other brands are considered on a case-by-case basis.  Please contact our service department for additional information.

During the annual service appointment our service technicians will:

Remove all covers and disassemble the machine.  Clean,oil, and adjust the machine. 

 

What to Bring:

  • Bobbin Case
  • Bobbin
  • #1 Foot
  • Automatic Buttonhole Foot (If it needs calibration)
  • Power Cord
  • Foot Pedal
**Embroidery module if you are having embroidery related service issues.**

Please leave the following at home:

Machine covers and accessories and remove non-factory installed lights.
They will check the following:
Check motor, foot control, electrical connections, belts, pulley, hand wheel, bobbin winder, tension unit, needle bar, presser foot bar, hook driver, feed dog, hook clearance, needle position, needle/hook timing.  They will also inspect for worn and/or broken parts.


Adjustments will happen as needed on: 
bobbin case tension, top tension, straight stitch, zig zag, thread regulator, balance, and speed control.

210-698-6076      5139 N. Loop 1604 West, Ste. 110 San Antonio, TX 78249      MON-FRI: 9-5 | SAT:9-4 | CLOSED SUN
Copyright © 2007-2016 - SEW SPECIAL QUILTS | Website Design by LikeSewWebsites.com